Browse our shelves
-
Stainless steel roller stand with adjustable rounded wheels that can be moved or removed. The wheels can be placed close together for small tubes or spread apart for larger tubes. Diameter of the wheels 58mm. The wheels are specially resistant to wear and heat - Different models are available on our site
-
Distributed by MVE
Curved plier
The plier is 15 cm long. -
Distributed by MVE
Fine pointed and bent tip plier
The plier is 11,5 cm long. -
En réapprovisionnementDistributed by MVE
Tungsten curved plier
Curved plier in Tungsten. Total length18 cm, tungsten length 3.5cm -
Distributed by MVE
Diamond scraper pensil and refill
-
En réapprovisionnementDistributed by MVE
Wooden tweezers
Length 230mm -
Distributed by MVE
Straight single brass swivel
Diameter : 4.8mm Length : 40mm -
Distributed by MVE
Blowing kit w/ straight single brass swivel
The kit includes :- 150cm long silicon hose ID 6mm/OD 8mm x1
- Straing single brass swivel (⌀ 4,8 mm x 40 mm) x1
- Mouth piece x1
-
Distributed by MVE
Graphite Aérosol spray 10oz
-
Distributed by MVE
Black Magic Carbon Wax
-
Bussing Tools
3 fingers locking claw – EA Style
-
Bussing Tools
3 fingers locking claws
-
En réapprovisionnement5x3 cm
-
MVE
Tube Mandrel
It's made of stainless steel tube and 24cm length -
Distributed by MVE
Small octogonal graphite reamer ø 16-2 mm
Handle lenght 22.5 cm Graphite lenght 40 mm, ø 16-2 mm -
MVE
Grooved Marver
One ribbed side to create a decor (ribbed or crossed) and one flat side. Size 6.50 x 9.50cm -
Distributed by MVE
Double 90° brass swivel
Brass swivel with 2 pivoting sides Two sizes available Medium: Ø 6.35 mm Large: Ø 9.53 mm -
En réapprovisionnementDistributed by MVE
12-In-1 Graphite Marble Mold
The outside dimensions of the graphite block roughly are 2" thick x 4-1/8" x 4-1/8". -
MVE
Vin Pin
-
The Blast Shield
Small graphite straight shaper
Graphite length 7.5cm, width 2cm Total length 24.5 cm -
The Blast Shield
CurvedGraphite Paddle
Graphite length: 7.5cm Width: 5.5cm at the base, 2.5cm at the tip Total length: 25cm -
The Blast Shield
Stainless Steel Triangle Reamer
Handle lenght 12.5 cm Reamer isosceles triangle base 50 mm, height 75 mm -
Distributed by MVE
Graphite Marble mould – Bump 6
-
Distributed by MVE
Graphite Marble mould – Bump 2
-
Distributed by MVE
Graphite paper tape
-
Distributed by MVE
Large disc big hole beads’ graphite mould
-
En réapprovisionnementDistributed by MVE
Skull graphite “push” mould
Approximate mould (skull) size: 14mm (W) x 20mm (H) x 8mm (D) External size 5.5 x 5.5 x 1.2cm height. -
Distributed by MVE
30° Graphite Cone Mold
Inner dimensions: 3" (76mm) diameter at the opening tapering to a point at the bottom at 2.6" (67mm) deep. Outside dimensions: 4" (10.1cm) diameter x 2.9" (7.5cm) height -
En réapprovisionnementDistributed by MVE
Brass reamer – square base 14-2 mm
Handle lenght 22.5 cm Brass reamer lenght 90 mm, square base 14-2 mm -
Distributed by MVE
Frit Sifters
Diameter 16cm Height 10cm -
Distributed by MVE
Marble Tweezer
-
Distributed by MVE
Small leaf masher – 1 side
Tool measures approximately 12" in total Length. -
Distributed by MVE
Ground Glass Joint Shaping Mold
-
Distributed by MVE
Small brass holding claws
Total length: 25cm Handle lenght: 16 cm Claw and opening: 10,5 cm - 3,1cm -
Distributed by MVE
Silicon hose
⌀ inside : 6 mm ⌀ outside : 8 mm Wall : 1 mm -
Perlenpresse
Tu-Bi-Co Tool
Graphite rail 100x40x40mm Included with the wooden handle -
Perlenpresse
Graphite paddle for lens ⌀28x7mm with mandrel slot
Graphite paddle size 40x30x15mm Wooden handle 90mm -
Perlenpresse
Graphite paddle for Marble round lips (⌀70mm)
-
Perlenpresse
Graphite paddle for cones – round lips
-
En réapprovisionnementPerlenpresse
Graphite paddle ring rails 9 forms
-
Distributed by MVE, Madhatter Glassworks
Double 90° swivel BloHoz
The diameter of the swivel is 1/4 -
Perlenpresse
Cabochon mandrel
Threaded bit M2,5 x 6mm -
Perlenpresse
Cabochon disk base
Thickness 2mm Threading - M2.5 - fits all systems with 2.5mm thread -
En réapprovisionnementPerlenpresse
Set 10 nuts for cabochon mandrel – THIN
Dimensions ⌀5,5mm x 2mm Threading M2,5 -
En réapprovisionnementPerlenpresse
Set 5 nuts for cabochon mandrel – THICK
Dimensions ⌀5,5mm x 5mm Threading M2,5 -
Perlenpresse
Stainless steel ring with interchangeable tops
Threading M 2,5 -
Perlenpresse
Set 2 threaded rods M4 with threaded sleeves
-
Perlenpresse
Graphite knob roller pattern n°7 – small
Knob dimensions +/- (h) 20mm x (w) 17mm -
Perlenpresse
Graphite knob roller pattern n°2 – small
Knob dimensions +/- (h) 20mm x (w) 18mm -
Perlenpresse
Mashers with round plates n°3
Plate size ∅ 30mm -
Bussing Tools
3-finger locking claw – Lacy Style
-
Distributed by MVE
Leaf masher
Leaf's size +/- 40 x 25mm -
Distributed by MVE
Small angled masher 1 side groove – ECO
-
En réapprovisionnementDistributed by MVE
Rod holder CORINA
Length 255 mm, ⌀ 6 mm Ideal for glass rods ⌀2 - 12mm -
Distributed by MVE
Set of 3 beads tweezers
-
Distributed by MVE
Vin Pin – Rectangle
-
En réapprovisionnementPerlenpresse
Mashers with round plates n°40 thin
Plate size ∅ 40mm -
Perlenpresse
Mashers with textured plates n°6
Texture size 50 x 50mm -
Perlenpresse
Mashers for plates with pattern
Size +/- 24cm long and 2cm wide Hole dimater 6mm Material Stainless steel -
Perlenpresse
SET texture plates for mashers n°12
SET of 2 plates Pattern size 50 x 50mm -
Perlenpresse
SET texture plates for mashers n°23
SET of 2 plates Pattern size 50 x 50mm -
Perlenpresse
Round texture plate for mashers n°4
Sold individually Plate size ∅ 40mm -
Perlenpresse
Round texture plate for mashers n°20
Sold individually Plate size ∅ 40mm -
Perlenpresse
Graphite knob roller pattern n°3 – small
Knob dimensions +/- (h) 20mm x (w) 18mm -
Perlenpresse
Hollow mandrel for hollow bead
Length +/- 25cm Wall thickness ø2mm/0.3mm ; ø3mm/0.4mm Material Stainless steel -
Perlenpresse
Interchangeable pendant for beads ø 15mm
Pendant ø 15mm for 1mm thickness Threading M 2,5 Material Stainless steel -
Perlenpresse
Cabochon square base
Thickness 2mm Threading - M2.5 - fits all systems with 2.5mm thread -
Perlenpresse
Tool holder
Length 90mm Diameter 9mm Weight 25g -
Distributed by MVE
Octogonal graphite reamer ⌀20-40mm
Handle lenght 33,5 cm Graphite length 155 mm, ⌀ 40-20 mm -
Distributed by MVE
Octogonal graphite reamer ⌀2-16mm
Handle lenght 18 cm Graphite length 127 mm, ⌀ 2-16 mm -
The Blast Shield
Silicon blow hose adaptaters
Sold by the unit We do not have any control over which colour we get ( black or white) -
Distributed by MVE
Large tungsten pick
Handle size - 18,5 cm Tungsten pick - 18 cm ⌀ 3,2 mm -
Perlenpresse
Wooden handle tungsten poker
Total length 15.5 cm Pocker length 6.2 cm, ⌀ 3.2mm -
The Blast Shield
Curved Sophieta
Metal roller stand with adjustable rounded wheels that can be moved or removed. The wheels can be close together for small tubes or spread apart for larger tubes. -
The Blast Shield
STUMP RH/LH paddle
Available in right-handed and left-handed versions -
The Blast Shield
Butterknife graphite tool
Graphite length 7.5cm, width 2cm Total length 24.5 cm -
The Blast Shield
Mini paddle curved edge
Graphite size 60 x 38mm, épaisseur 6mm -
Perlenpresse
Graphite knob roller pattern n°1
Knob dimensions +/- (h) 20mm x (w) 18mm -
Perlenpresse
Top former for square base pastilles
Mould size 100 x 100 x 20mm -
En réapprovisionnementPerlenpresse
Top former for straight sided lentils
Mould size 100 x 100 x 20mm