Browse our shelves
-
Stainless steel roller stand with adjustable rounded wheels that can be moved or removed. The wheels can be placed close together for small tubes or spread apart for larger tubes. Diameter of the wheels 58mm. The wheels are specially resistant to wear and heat - Different models are available on our site
-
Distributed by MVE
Tweezer plier with rounded end
-
Distributed by MVE
Spring plier
The plier is 11.5 cm long. -
Distributed by MVE
Thin tip plier
The plier is 11 cm long. -
Distributed by MVE
Curved plier
The plier is 15 cm long. -
Distributed by MVE
Fine pointed and bent tip plier
The plier is 11,5 cm long. -
Distributed by MVE
Parallel masher
Paddle size 1-5/8" by 1-7/8 with metal Handles. Tool measures approximately 12" in total Length. -
Distributed by MVE
Leaf masher
Masher's lenght 30 cm Masher size 4 x 4,7 cm -
Distributed by MVE
Medium locking claw
Handle length: 6.5” long -
Distributed by MVE
14″ Inside-out locking claw
Handle length: 6.5” long -
MVE
Multi-Stopper
14 Silicone stopperss for a tight fit on tubes with ID from 18mm to 110mm. -
En réapprovisionnementDistributed by MVE
Tungsten curved plier
Curved plier in Tungsten. Total length18 cm, tungsten length 3.5cm -
Distributed by MVE
Tungsten tweezers – straight
Tungsten straight plier. Total length 18 cm, tungsten length 3.5cm -
Distributed by MVE
Diamond scraper pensil and refill
-
Distributed by MVE
Graphite Paddles
-
Distributed by MVE
Graphite plate
Size details in description below -
En réapprovisionnementDistributed by MVE
Wooden tweezers
Length 230mm -
Distributed by MVE
90° single brass swivel
Brass spinner with one fully pivoting side. Three sizes available Small: Ø 4.76 mm Medium: Ø 6.35 mm Large: Ø 9.53 mm -
Distributed by MVE
Tungsten Scoring Knife
The knife is made out of metal, and the blades can be replaced. -
Distributed by MVE
Straight single brass swivel
Diameter : 4.8mm Length : 40mm -
Distributed by MVE
Blowing kit w/ 90° single brass swivel
the kit includes :- 150 cm long silicone hose ID 6mm/OD 8mm x1
- 90° single brass swivel (⌀ 6,35 mm aka 1/4") x1
- plastic mouth piece x1
-
Distributed by MVE
Blowing kit w/ straight single brass swivel
The kit includes :- 150cm long silicon hose ID 6mm/OD 8mm x1
- Straing single brass swivel (⌀ 4,8 mm x 40 mm) x1
- Mouth piece x1
-
Distributed by MVE
Mouthpieces for Blow Hose
For glassblowers -
Distributed by MVE
Tweezer Jacks
3 models available. -
Distributed by MVE
Graphite Aérosol spray 10oz
-
Distributed by MVE
Black Magic Carbon Wax
-
Bussing Tools
3 fingers locking claw – EA Style
-
Bussing Tools
3 fingers locking claws
-
MVE
Mandrel
Length: 25cm -
En réapprovisionnementMVE
Cup Shears
They measure 19cm in length, with a 3cm long blade that is 1.5mm thick. Made from stainless steel. -
MVE
Cup Shears small
They measure 20cm in length, with a 3cm long blade that is 1.5mm thick. Made from stainless steel. -
En réapprovisionnementThey measure 17cm in lenght
-
En réapprovisionnement5x3 cm
-
MVE
Ring Mandrel
The diameter of the ring tube is 19mm, lenght of the ring tube is 3,5cm, the leght of the mandrel is 29.5 cm. -
MVE
Tube Mandrel
It's made of stainless steel tube and 24cm length -
Distributed by MVE
Tweezer Mashers
In stainless steel -
Distributed by MVE
Octogonal graphite reamer ø 24-11 mm
Handle lenght 23 cm Graphite lenght 100 mm, ø 24-11 mm -
Distributed by MVE
Octogonal graphite reamer ø 38-2 mm
Handle lenght 23 cm Graphite lenght 50 mm, ø 38-2 mm -
Distributed by MVE
Octogonal graphite reamer ø 19-2 mm
Handle lenght 23 cm Graphite lenght 100 mm, ⌀ 19-2 mm -
Distributed by MVE
Small octogonal graphite reamer ø 16-2 mm
Handle lenght 22.5 cm Graphite lenght 40 mm, ø 16-2 mm -
MVE
Blow Pipe
Small : 1/4 body, 3/8 head Medium : 5/16 body, 7/16 head Large : 3/8 body, 9/16 head -
MVE
Frit Tray
-
MVE
Grooved Marver
One ribbed side to create a decor (ribbed or crossed) and one flat side. Size 6.50 x 9.50cm -
Distributed by MVE
Double 90° brass swivel
Brass swivel with 2 pivoting sides Two sizes available Medium: Ø 6.35 mm Large: Ø 9.53 mm -
En réapprovisionnementDistributed by MVE
12-In-1 Graphite Marble Mold
The outside dimensions of the graphite block roughly are 2" thick x 4-1/8" x 4-1/8". -
MVE
Vin Pin
-
The Blast Shield
Small graphite straight shaper
Graphite length 7.5cm, width 2cm Total length 24.5 cm -
The Blast Shield
Large cone graphite reamer ø 26 mm
Handle lenght 18 cm Graphite lenght 65 mm, ø 26 mm -
The Blast Shield
CurvedGraphite Paddle
Graphite length: 7.5cm Width: 5.5cm at the base, 2.5cm at the tip Total length: 25cm -
The Blast Shield
Stainless Steel Triangle Reamer
Handle lenght 12.5 cm Reamer isosceles triangle base 50 mm, height 75 mm -
Distributed by MVE
Graphite Marble mould – Bump 6
-
Distributed by MVE
Graphite Marble mould – Bump 2
-
Distributed by MVE
Graphite paper tape
-
Distributed by MVE
Large disc big hole beads’ graphite mould
-
En réapprovisionnementDistributed by MVE
Skull graphite “push” mould
Approximate mould (skull) size: 14mm (W) x 20mm (H) x 8mm (D) External size 5.5 x 5.5 x 1.2cm height. -
En réapprovisionnementDistributed by MVE
Graphite Necking Tool
Size 8cm (h) x 7.5cm (w) x 5.5cm (stand's depth) -
Distributed by MVE
30° Graphite Cone Mold
Inner dimensions: 3" (76mm) diameter at the opening tapering to a point at the bottom at 2.6" (67mm) deep. Outside dimensions: 4" (10.1cm) diameter x 2.9" (7.5cm) height -
En réapprovisionnementDistributed by MVE
Brass reamer – square base 14-2 mm
Handle lenght 22.5 cm Brass reamer lenght 90 mm, square base 14-2 mm -
The Blast Shield
Graphite triangular shaper – blast shield
Handle lenght 12.5 cm Graphite base 43 mm, height 65 mm, thickness 10 mm -
The Blast Shield
Small cone graphite reamer ø 24 mm
Handle lenght 18 cm Graphite lenght 30 mm, ø 24 mm -
En réapprovisionnementDistributed by MVE
Triangular stainless shaper / Flaring tool
Handle lenght 19 cm Graphite isoceles triangle base 40 mm, height 34 mm -
Distributed by MVE
Frit Sifters
Diameter 16cm Height 10cm -
En réapprovisionnementDistributed by MVE
Graphite Reamer – Pencil Style
Handle lenght 10 cm Graphite lenght 130 mm, ø 8 mm -
Distributed by MVE
Marble Tweezer
-
En réapprovisionnementMetal roller stand with adjustable rounded wheels that can be moved or removed. The wheels can be close together for small tubes or spread apart for larger tubes.
-
En réapprovisionnementDistributed by MVE
Medium holding claws
Total length: 31cm Handle lenght: 14,5 cm Opening: 5,5cm Also available with Inside-out claws. -
En réapprovisionnementDistributed by MVE
Medium Inside-out claws
Total length: 31cm Handle lenght: 14,5 cm Opening: 6 - 7,3cm Also available with normal claws. -
Distributed by MVE
Small leaf masher – 1 side
Tool measures approximately 12" in total Length. -
Distributed by MVE
Rectangular parallel masher
Total lenght: 28 cm Paddle size: 20 x 35 mm -
Distributed by MVE
Etching Cream
85 g soit +/-90mL -
En réapprovisionnementDistributed by MVE
Octogonal graphite reamer ⌀8-30mm
Handle lenght 28 cm Graphite lenght 150 mm, ⌀ 30-8 mm -
En réapprovisionnementDistributed by MVE
Individual tungsten poker
length - 17,5 cm -
Distributed by MVE
Rod holder
Length 30 cm, ⌀ 10 mm Ideal for glass rods ⌀2 - 12mm -
Distributed by MVE
Wooden handle tungsten poker
Total length - 18 cm Poker - 7 cm ⌀ 2 mm -
En réapprovisionnementDistributed by MVE
Glass tubing scoring knife
The stick of the knife is in metal, and blades can be replaced. -
Distributed by MVE
Ground Glass Joint Shaping Mold
-
Distributed by MVE
Small brass holding claws
Total length: 25cm Handle lenght: 16 cm Claw and opening: 10,5 cm - 3,1cm -
Distributed by MVE
Silicon hose
⌀ inside : 6 mm ⌀ outside : 8 mm Wall : 1 mm