Browse our shelves
-
Stainless steel roller stand with adjustable rounded wheels that can be moved or removed. The wheels can be placed close together for small tubes or spread apart for larger tubes. Diameter of the wheels 58mm. The wheels are specially resistant to wear and heat - Different models are available on our site -
Distributed by MVECurved plier
The plier is 15 cm long. -
Distributed by MVEFine pointed and bent tip plier
The plier is 11,5 cm long. -
En réapprovisionnement
Distributed by MVETungsten curved plier
Curved plier in Tungsten. Total length18 cm, tungsten length 3.5cm -
Distributed by MVEDiamond scraper pensil and refill
-
En réapprovisionnement
Distributed by MVEWooden tweezers
Length 230mm -
Distributed by MVEStraight single brass swivel
Diameter : 4.8mm Length : 40mm -
Distributed by MVEBlowing kit w/ straight single brass swivel
The kit includes :- 150cm long silicon hose ID 6mm/OD 8mm x1
- Straing single brass swivel (⌀ 4,8 mm x 40 mm) x1
- Mouth piece x1
-
Distributed by MVEGraphite Aérosol spray 10oz
-
Distributed by MVEBlack Magic Carbon Wax
-
Graphite size 65 x 50mm Handle length 17cm -
Bussing Tools3 fingers locking claw – EA Style
-
Bussing Tools3 fingers locking claws
-
En réapprovisionnement
5x3 cm -
MVETube Mandrel
It's made of stainless steel tube and 24cm length -
Distributed by MVESmall octogonal graphite reamer ø 16-2 mm
Handle lenght 22.5 cm Graphite lenght 40 mm, ø 16-2 mm -
MVEGrooved Marver
One ribbed side to create a decor (ribbed or crossed) and one flat side. Size 6.50 x 9.50cm -
Distributed by MVEDouble 90° brass swivel
Brass swivel with 2 pivoting sides Two sizes available Medium: Ø 6.35 mm Large: Ø 9.53 mm -
En réapprovisionnement
Distributed by MVE12-In-1 Graphite Marble Mold
The outside dimensions of the graphite block roughly are 2" thick x 4-1/8" x 4-1/8". -
MVEVin Pin
-
The Blast ShieldSmall graphite straight shaper
Graphite length 7.5cm, width 2cm Total length 24.5 cm -
The Blast ShieldCurvedGraphite Paddle
Graphite length: 7.5cm Width: 5.5cm at the base, 2.5cm at the tip Total length: 25cm -
The Blast ShieldStainless Steel Triangle Reamer
Handle lenght 12.5 cm Reamer isosceles triangle base 50 mm, height 75 mm -
Distributed by MVEGraphite Marble mould – Bump 6
-
Distributed by MVEGraphite Marble mould – Bump 2
-
Distributed by MVEGraphite paper tape
-
Distributed by MVELarge disc big hole beads’ graphite mould
-
En réapprovisionnement
Distributed by MVESkull graphite “push” mould
Approximate mould (skull) size: 14mm (W) x 20mm (H) x 8mm (D) External size 5.5 x 5.5 x 1.2cm height. -
Distributed by MVE30° Graphite Cone Mold
Inner dimensions: 3" (76mm) diameter at the opening tapering to a point at the bottom at 2.6" (67mm) deep. Outside dimensions: 4" (10.1cm) diameter x 2.9" (7.5cm) height -
En réapprovisionnement
Distributed by MVEBrass reamer – square base 14-2 mm
Handle lenght 22.5 cm Brass reamer lenght 90 mm, square base 14-2 mm -
Distributed by MVEFrit Sifters
Diameter 16cm Height 10cm -
Distributed by MVEMarble Tweezer
-
Distributed by MVESmall leaf masher – 1 side
Tool measures approximately 12" in total Length. -
Distributed by MVEGround Glass Joint Shaping Mold
-
⌀ 21 mm -
blade size 7 x 7 x 4,6 mm (fitting the large tungsten scoring knife) -
Distributed by MVESmall brass holding claws
Total length: 25cm Handle lenght: 16 cm Claw and opening: 10,5 cm - 3,1cm -
Distributed by MVESilicon hose
⌀ inside : 6 mm ⌀ outside : 8 mm Wall : 1 mm -
PerlenpresseTu-Bi-Co Tool
Graphite rail 100x40x40mm Included with the wooden handle -
PerlenpresseGraphite paddle for lens ⌀28x7mm with mandrel slot
Graphite paddle size 40x30x15mm Wooden handle 90mm -
PerlenpresseGraphite paddle for Marble round lips (⌀70mm)
-
PerlenpresseGraphite paddle for cones – round lips
-
En réapprovisionnement
PerlenpresseGraphite paddle ring rails 9 forms
-
Distributed by MVE, Madhatter GlassworksDouble 90° swivel BloHoz
The diameter of the swivel is 1/4 -
PerlenpresseCabochon mandrel
Threaded bit M2,5 x 6mm -
PerlenpresseCabochon disk base
Thickness 2mm Threading - M2.5 - fits all systems with 2.5mm thread -
En réapprovisionnement
PerlenpresseSet 10 nuts for cabochon mandrel – THIN
Dimensions ⌀5,5mm x 2mm Threading M2,5 -
En réapprovisionnement
PerlenpresseSet 5 nuts for cabochon mandrel – THICK
Dimensions ⌀5,5mm x 5mm Threading M2,5 -
PerlenpresseStainless steel ring with interchangeable tops
Threading M 2,5 -
PerlenpresseSet 2 threaded rods M4 with threaded sleeves
-
PerlenpresseGraphite knob roller pattern n°7 – small
Knob dimensions +/- (h) 20mm x (w) 17mm -
PerlenpresseGraphite knob roller pattern n°2 – small
Knob dimensions +/- (h) 20mm x (w) 18mm -
PerlenpresseMashers with round plates n°3
Plate size ∅ 30mm -
Bussing Tools3-finger locking claw – Lacy Style
-
Total length 25cm -
Nose length 38mm -
Distributed by MVELeaf masher
Leaf's size +/- 40 x 25mm -
Distributed by MVESmall angled masher 1 side groove – ECO
-
En réapprovisionnement
Distributed by MVERod holder CORINA
Length 255 mm, ⌀ 6 mm Ideal for glass rods ⌀2 - 12mm -
Distributed by MVESet of 3 beads tweezers
-
Handle lenght 158 mm ∅ 8mm Brass reamer lenght 33 mm, square base 16-2 mm -
Handle lenght 92mm ∅ 6mm Brass reamer lenght 35mm, square base 10-1 mm -
Distributed by MVEVin Pin – Rectangle
-
Excellent tool for shaping and flaring tops and bases -
En réapprovisionnement
PerlenpresseMashers with round plates n°40 thin
Plate size ∅ 40mm -
PerlenpresseMashers with textured plates n°6
Texture size 50 x 50mm -
PerlenpresseMashers for plates with pattern
Size +/- 24cm long and 2cm wide Hole dimater 6mm Material Stainless steel -
PerlenpresseSET texture plates for mashers n°12
SET of 2 plates Pattern size 50 x 50mm -
PerlenpresseSET texture plates for mashers n°23
SET of 2 plates Pattern size 50 x 50mm -
PerlenpresseRound texture plate for mashers n°4
Sold individually Plate size ∅ 40mm -
PerlenpresseRound texture plate for mashers n°20
Sold individually Plate size ∅ 40mm -
PerlenpresseGraphite knob roller pattern n°3 – small
Knob dimensions +/- (h) 20mm x (w) 18mm -
PerlenpresseHollow mandrel for hollow bead
Length +/- 25cm Wall thickness ø2mm/0.3mm ; ø3mm/0.4mm Material Stainless steel -
PerlenpresseInterchangeable pendant for beads ø 15mm
Pendant ø 15mm for 1mm thickness Threading M 2,5 Material Stainless steel -
PerlenpresseCabochon square base
Thickness 2mm Threading - M2.5 - fits all systems with 2.5mm thread -
PerlenpresseTool holder
Length 90mm Diameter 9mm Weight 25g -
Distributed by MVEOctogonal graphite reamer ⌀20-40mm
Handle lenght 33,5 cm Graphite length 155 mm, ⌀ 40-20 mm -
Distributed by MVEOctogonal graphite reamer ⌀2-16mm
Handle lenght 18 cm Graphite length 127 mm, ⌀ 2-16 mm -
The Blast ShieldSilicon blow hose adaptaters
Sold by the unit We do not have any control over which colour we get ( black or white) -
Distributed by MVELarge tungsten pick
Handle size - 18,5 cm Tungsten pick - 18 cm ⌀ 3,2 mm -
PerlenpresseWooden handle tungsten poker
Total length 15.5 cm Pocker length 6.2 cm, ⌀ 3.2mm -
The Blast ShieldCurved Sophieta
Metal roller stand with adjustable rounded wheels that can be moved or removed. The wheels can be close together for small tubes or spread apart for larger tubes. -
The Blast ShieldSTUMP RH/LH paddle
Available in right-handed and left-handed versions -
The Blast ShieldButterknife graphite tool
Graphite length 7.5cm, width 2cm Total length 24.5 cm -
The Blast ShieldMini paddle curved edge
Graphite size 60 x 38mm, épaisseur 6mm -
PerlenpresseGraphite knob roller pattern n°1
Knob dimensions +/- (h) 20mm x (w) 18mm -
PerlenpresseTop former for square base pastilles
Mould size 100 x 100 x 20mm -
En réapprovisionnement
PerlenpresseTop former for straight sided lentils
Mould size 100 x 100 x 20mm
