Browse our shelves
-
Stainless steel roller stand with adjustable rounded wheels that can be moved or removed. The wheels can be placed close together for small tubes or spread apart for larger tubes. Diameter of the wheels 58mm. The wheels are specially resistant to wear and heat - Different models are available on our site
-
Distributed by MVE
Spring plier
The plier is 11.5 cm long. -
Distributed by MVE
Curved plier
The plier is 15 cm long. -
Distributed by MVE
Fine pointed and bent tip plier
The plier is 11,5 cm long. -
Distributed by MVE
14″ Inside-out locking claw
Handle length: 6.5” long -
MVE
Multi-Stopper
14 Silicone stopperss for a tight fit on tubes with ID from 18mm to 110mm. -
En réapprovisionnementDistributed by MVE
Tungsten curved plier
Curved plier in Tungsten. -
Distributed by MVE
Diamond scraper pensil and refill
-
En réapprovisionnementDistributed by MVE
Wooden tweezers
Length 230mm -
En réapprovisionnementDistributed by MVE
Pencil with double diamond scraper
The pencil is 13cm long. -
Distributed by MVE
Straight single brass swivel
Diameter : 4.8mm Length : 40mm -
Distributed by MVE
Blowing kit w/ straight single brass swivel
The kit includes :- 150cm long silicon hose ID 6mm/OD 8mm x1
- Straing single brass swivel (⌀ 4,8 mm x 40 mm) x1
- Mouth piece x1
-
Distributed by MVE
Graphite Aérosol spray 10oz
-
Distributed by MVE
Black Magic Carbon Wax
-
En réapprovisionnementDistributed by MVE
Marble mould
Graphite moulds for Marble -
Bhohemoth Tools
3 fingers locking claw – EA Style
-
Bhohemoth Tools
3 fingers locking claws
-
En réapprovisionnement5x3 cm
-
MVE
Tube Mandrel
It's made of stainless steel tube and 24cm length -
Distributed by MVE
Octogonal graphite reamer ø 19-2 mm
Handle lenght 23 cm Graphite lenght 100 mm, ⌀ 19-2 mm -
Distributed by MVE
Small octogonal graphite reamer ø 16-2 mm
Handle lenght 22.5 cm Graphite lenght 40 mm, ø 16-2 mm -
En réapprovisionnementDistributed by MVE
Double 90° brass swivel
The diameter of the swivel is 1/4 -
En réapprovisionnementDistributed by MVE
12-In-1 Graphite Marble Mold
The outside dimensions of the graphite block roughly are 2" thick x 4-1/8" x 4-1/8". -
MVE
Vin Pin
-
Distributed by MVE
Small graphite straight shaper
Graphite length 7.5cm, width 2cm Total length 24.5 cm -
Distributed by MVE
CurvedGraphite Paddle
Graphite length: 7.5cm Width: 5.5cm at the base, 2.5cm at the tip Total length: 25cm -
Distributed by MVE, The Blast Shield
Stainless Steel Triangle Reamer
Handle lenght 12.5 cm Reamer isosceles triangle base 50 mm, height 75 mm -
Distributed by MVE
Graphite paper tape
-
Distributed by MVE
Large disc big hole beads’ graphite mould
-
En réapprovisionnementDistributed by MVE
Skull graphite “push” mould
Approximate mould (skull) size: 14mm (W) x 20mm (H) x 8mm (D) External size 5.5 x 5.5 x 1.2cm height. -
En réapprovisionnementDistributed by MVE
Small brass holding claws
Total length: 25cm Handle lenght: 16 cm Opening: 3,1cm -
En réapprovisionnementDistributed by MVE
30° Graphite Cone Mold
Inner dimensions: 3" (76mm) diameter at the opening tapering to a point at the bottom at 2.6" (67mm) deep. Outside dimensions: 4" (10.1cm) diameter x 2.9" (7.5cm) height -
En réapprovisionnementDistributed by MVE
Brass reamer – square base 14-2 mm
Handle lenght 22.5 cm Brass reamer lenght 90 mm, square base 14-2 mm -
Distributed by MVE
Frit Sifters
Diameter 16cm Height 10cm -
Distributed by MVE
Marble Tweezer
-
Distributed by MVE
Small leaf masher – 1 side
Tool measures approximately 12" in total Length. -
Distributed by MVE
Etching Cream
85 g soit +/-90mL -
Distributed by MVE
Rod holder
Length 31 cm, ⌀ 10 mm Ideal for glass rods ⌀2 - 12mm -
En réapprovisionnementDistributed by MVE
Ground Glass Joint Shaping Mold
-
Distributed by MVE
Small brass holding claws
Total length: 25cm Handle lenght: 16 cm Claw and opening: 10,5 cm - 3,1cm -
Distributed by MVE
Silicon hose
⌀ inside : 6 mm ⌀ outside : 8 mm Wall : 1 mm -
En réapprovisionnementPerlenpresse
Tu-Bi-Co Tool
Graphite rail 100x40x40mm Included with the wooden handle -
Perlenpresse
Graphite paddle for lens ⌀28x7mm with mandrel slot
Graphite paddle size 40x30x15mm Wooden handle 90mm -
Perlenpresse
Graphite paddle for Marble round lips (⌀70mm)
-
Perlenpresse
Graphite paddle for cones – round lips
-
Perlenpresse
Graphite paddle V rails for 8mm discs
-
Perlenpresse
Graphite paddle ring rails 9 forms
-
Perlenpresse
Cabochon mandrel 4mm
Threaded bit M2,5 x 4mm -
Distributed by MVE, Madhatter Glassworks
Double 90° swivel BloHoz
The diameter of the swivel is 1/4 -
Perlenpresse
Cabochon mandrel 6mm
Threaded bit M2,5 x 6mm -
Perlenpresse
Cabochon disk base
Thickness 2mm Threading - M2.5 - fits all systems with 2.5mm thread -
Perlenpresse
Set 10 nuts for cabochon mandrel – THIN
Dimensions ⌀5,5mm x 2mm Threading M2,5 -
Perlenpresse
Set 5 nuts for cabochon mandrel – THICK
Dimensions ⌀5,5mm x 5mm Threading M2,5 -
Perlenpresse
Stainless steel ring with interchangeable tops
Threading M 2,5 -
Perlenpresse
Graphite knob roller pattern n°9 – small
Knob dimensions +/- (h) 20mm x (w) 20mm -
Perlenpresse
Set 2 threaded rods M4 with threaded sleeves
-
Perlenpresse
Graphite knob roller pattern n°7 – small
Knob dimensions +/- (h) 20mm x (w) 17mm -
Perlenpresse
Graphite knob roller pattern n°2 – small
Knob dimensions +/- (h) 20mm x (w) 18mm -
Perlenpresse
Mashers with textured plates n°5
Pattern size 50 x 50mm -
Perlenpresse
Mashers with round plates n°3
Plate size ∅ 30mm -
Perlenpresse
Top former for pastilles
Mould size 100 x 100 x 20mm -
Bhohemoth Tools
3-finger locking claw – Lacy Style
-
Distributed by MVE
Leaf masher
Leaf's size +/- 40 x 25mm -
Distributed by MVE
Small angled masher 1 side groove – ECO
-
En réapprovisionnementDistributed by MVE
Small round masher – ECO
-
En réapprovisionnementDistributed by MVE
Rod holder CORINA
Length 255 mm, ⌀ 6 mm Ideal for glass rods ⌀2 - 12mm -
En réapprovisionnementDistributed by MVE
Set of 3 beads tweezers
-
En réapprovisionnementDistributed by MVE
Brass Necking Tool
Size 10cm (h) x 7.5cm (w) x 5.5cm (base depth) -
Distributed by MVE
No-Scratch Titanium Pen
-
Distributed by MVE
Vin Pin – Rectangle
-
Distributed by MVE
Marble Tweezer ø14mm
Length 17cm Diametre The grip rings have 20mm outer diameter and 14mm inner diameter Material Stainless steel -
Perlenpresse
Mashers with round plates n°40 thin
Plate size ∅ 40mm -
Perlenpresse
Mashers with textured plates n°6
Texture size 50 x 50mm -
Perlenpresse
Mashers for plates with pattern
Size +/- 24cm long and 2cm wide Hole dimater 6mm Material Stainless steel -
Perlenpresse
SET texture plates for mashers n°12
SET of 2 plates Pattern size 50 x 50mm -
Perlenpresse
SET texture plates for mashers n°23
SET of 2 plates Pattern size 50 x 50mm -
Perlenpresse
Round texture plate for mashers n°4
Sold individually Plate size ∅ 40mm -
Perlenpresse
Round texture plate for mashers n°20
Sold individually Plate size ∅ 40mm -
Perlenpresse
Graphite knob roller pattern n°3 – small
Knob dimensions +/- (h) 20mm x (w) 18mm