Browse our shelves
-
Stainless steel roller stand with adjustable rounded wheels that can be moved or removed. The wheels can be placed close together for small tubes or spread apart for larger tubes. Diameter of the wheels 58mm. The wheels are specially resistant to wear and heat - Different models are available on our site -
Distributed by MVESpring plier
The plier is 11.5 cm long. -
Distributed by MVECurved plier
The plier is 15 cm long. -
Distributed by MVEFine pointed and bent tip plier
The plier is 11,5 cm long. -
Distributed by MVE14″ Inside-out locking claw
Handle length: 6.5” long -
MVEMulti-Stopper
14 Silicone stopperss for a tight fit on tubes with ID from 18mm to 110mm. -
Distributed by MVETungsten curved plier
Curved plier in Tungsten. -
Distributed by MVEDiamond scraper pensil and refill
-
Distributed by MVEWooden tweezers
Length 230mm -
En réapprovisionnement
Distributed by MVEPencil with double diamond scraper
The pencil is 13cm long. -
Distributed by MVEStraight single brass swivel
Diameter : 4.8mm Length : 40mm -
Distributed by MVEBlowing kit w/ straight single brass swivel
The kit includes :- 150cm long silicon hose ID 6mm/OD 8mm x1
- Straing single brass swivel (⌀ 4,8 mm x 40 mm) x1
- Mouth piece x1
-
Distributed by MVEGraphite Aérosol spray 10oz
-
Distributed by MVEBlack Magic Carbon Wax
-
Distributed by MVEMarble mould
Graphite moulds for Marble -
Bhohemoth Tools3 fingers locking claw – EA Style
-
Bhohemoth Tools3 fingers locking claws
-
5x3 cm -
Length 17cm Material Stainless steel -
En réapprovisionnement
MVETube Mandrel
It's made of stainless steel tube and 24cm length -
En réapprovisionnement
It's made of Stainless Steel and total length is 135mm. -
Distributed by MVEOctogonal graphite reamer ø 19-2 mm
Handle lenght 23 cm Graphite lenght 100 mm, ⌀ 19-2 mm -
Distributed by MVESmall octogonal graphite reamer ø 16-2 mm
Handle lenght 22.5 cm Graphite lenght 40 mm, ø 16-2 mm -
Distributed by MVEDouble 90° brass swivel
The diameter of the swivel is 1/4 -
En réapprovisionnement
Distributed by MVE12-In-1 Graphite Marble Mold
The outside dimensions of the graphite block roughly are 2" thick x 4-1/8" x 4-1/8". -
MVEVin Pin
-
En réapprovisionnement
Distributed by MVESmall graphite straight shaper
Graphite length 7.5cm, width 2cm Total length 24.5 cm -
Distributed by MVECurvedGraphite Paddle
Graphite length: 7.5cm Width: 5.5cm at the base, 2.5cm at the tip Total length: 25cm -
Distributed by MVE, The Blast ShieldStainless Steel Triangle Reamer
Handle lenght 12.5 cm Reamer isosceles triangle base 50 mm, height 75 mm -
Distributed by MVEGraphite paper tape
-
Distributed by MVELarge disc big hole beads’ graphite mould
-
En réapprovisionnement
Distributed by MVESkull graphite “push” mould
Approximate mould (skull) size: 14mm (W) x 20mm (H) x 8mm (D) External size 5.5 x 5.5 x 1.2cm height. -
Distributed by MVESmall brass holding claws
Total length: 25cm Handle lenght: 16 cm Opening: 3,1cm -
Distributed by MVE30° Graphite Cone Mold
Inner dimensions: 3" (76mm) diameter at the opening tapering to a point at the bottom at 2.6" (67mm) deep. Outside dimensions: 4" (10.1cm) diameter x 2.9" (7.5cm) height -
En réapprovisionnement
Distributed by MVEBrass reamer – square base 14-2 mm
Handle lenght 22.5 cm Brass reamer lenght 90 mm, square base 14-2 mm -
Distributed by MVEFrit Sifters
Diameter 16cm Height 10cm -
Distributed by MVEMarble Tweezer
-
En réapprovisionnement
Metal roller stand with adjustable rounded wheels that can be moved or removed. The wheels can be close together for small tubes or spread apart for larger tubes. -
Distributed by MVESmall leaf masher – 1 side
Tool measures approximately 12" in total Length. -
En réapprovisionnement
Distributed by MVEEtching Cream
85 g soit +/-90mL -
Distributed by MVERod holder
Length 31 cm, ⌀ 10 mm Ideal for glass rods ⌀2 - 12mm -
Distributed by MVEGround Glass Joint Shaping Mold
-
⌀ 21 mm -
blade size 7 x 7 x 4,6 mm (fitting the large tungsten scoring knife) -
Distributed by MVESmall brass holding claws
Total length: 25cm Handle lenght: 16 cm Claw and opening: 10,5 cm - 3,1cm -
Distributed by MVESilicon hose
⌀ inside : 6 mm ⌀ outside : 8 mm Wall : 1 mm -
Distributed by MVE, Fusion Products Int.FPI Bead release
-
PerlenpresseTu-Bi-Co Tool
Graphite rail 100x40x40mm Included with the wooden handle -
PerlenpresseGraphite paddle for Marble round lips (⌀70mm)
-
PerlenpresseGraphite paddle V rails for 8mm discs
-
En réapprovisionnement
PerlenpresseGraphite paddle ring rails 9 forms
-
PerlenpresseCabochon mandrel 4mm
Threaded bit M2,5 x 4mm -
Distributed by MVE, Madhatter GlassworksDouble 90° swivel BloHoz
The diameter of the swivel is 1/4 -
PerlenpresseCabochon mandrel 6mm
Threaded bit M2,5 x 6mm -
PerlenpresseCabochon disk base
Thickness 2mm Threading - M2.5 - fits all systems with 2.5mm thread -
PerlenpresseSet 10 nuts for cabochon mandrel – THIN
Dimensions ⌀5,5mm x 2mm Threading M2,5
