Browse our shelves
-
Stainless steel roller stand with adjustable rounded wheels that can be moved or removed. The wheels can be placed close together for small tubes or spread apart for larger tubes. Diameter of the wheels 58mm. The wheels are specially resistant to wear and heat - Different models are available on our site -
Distributed by MVETweezer plier with rounded end
-
Distributed by MVESpring plier
The plier is 11.5 cm long. -
En réapprovisionnement
Distributed by MVEThin tip plier
The plier is 11 cm long. -
En réapprovisionnement
Distributed by MVECurved plier
The plier is 15 cm long. -
Distributed by MVEFine pointed and bent tip plier
The plier is 11,5 cm long. -
Excellent tool for shaping and flaring tops and bases -
Distributed by MVEParallel masher
Paddle size 1-5/8" by 1-7/8 with metal Handles. Tool measures approximately 12" in total Length. -
En réapprovisionnement
Distributed by MVELeaf masher
Masher's lenght 30 cm Masher size 4 x 4,7 cm -
Distributed by MVEMedium locking claw
Handle length: 6.5” long -
Distributed by MVE14″ Inside-out locking claw
Handle length: 6.5” long -
MVEMulti-Stopper
14 Silicone stopperss for a tight fit on tubes with ID from 18mm to 110mm. -
En réapprovisionnement
Distributed by MVETungsten curved plier
Curved plier in Tungsten. -
Distributed by MVETungsten tweezers – straight
Tungsten straight plier. -
Distributed by MVEDiamond scraper pensil and refill
-
Distributed by MVEGraphite Paddles
-
En réapprovisionnement
Distributed by MVEGraphite plate
Size details in description below -
Distributed by MVEWooden tweezers
Length 230mm -
Distributed by MVE90° single brass swivel
90-degree brass swivel -
Distributed by MVETungsten Scoring Knife
The knife is made out of metal, and the blades can be replaced. -
En réapprovisionnement
Distributed by MVEPencil with double diamond scraper
The pencil is 13cm long. -
Distributed by MVEStraight single brass swivel
Diameter : 4.8mm Length : 40mm -
Distributed by MVEBlowing kit w/ 90° single brass swivel
the kit includes :- 150 cm long silicone hose ID 6mm/OD 8mm x1
- 90° single brass swivel (⌀ 6,35 mm aka 1/4") x1
- plastic mouth piece x1
-
Distributed by MVEBlowing kit w/ straight single brass swivel
The kit includes :- 150cm long silicon hose ID 6mm/OD 8mm x1
- Straing single brass swivel (⌀ 4,8 mm x 40 mm) x1
- Mouth piece x1
-
Distributed by MVEMouthpieces for Blow Hose
For glassblowers -
Distributed by MVETweezer Jacks
3 models available. -
Distributed by MVEGraphite Aérosol spray 10oz
-
Distributed by MVEBlack Magic Carbon Wax
-
En réapprovisionnement
Distributed by MVEMarble mould
Graphite moulds for Marble -
Bhohemoth Tools3 fingers locking claw – EA Style
-
Bhohemoth Tools3 fingers locking claws
-
MVEMandrel
Length: 25cm -
En réapprovisionnement
MVECup Shears
They measure 19cm in length, with a 3cm long blade that is 1.5mm thick. Made from stainless steel. -
En réapprovisionnement
MVECup Shears small
They measure 20cm in length, with a 3cm long blade that is 1.5mm thick. Made from stainless steel. -
En réapprovisionnement
They measure 17cm in lenght -
En réapprovisionnement
The total length is 215mm. -
They measure 19cm in lenght -
En réapprovisionnement
5x3 cm -
Length 17cm Material Stainless steel -
En réapprovisionnement
Thick stainless steel stand, length 20cm -
MVERing Mandrel
The diameter of the ring tube is 19mm, lenght of the ring tube is 3,5cm, the leght of the mandrel is 29.5 cm. -
En réapprovisionnement
MVETube Mandrel
It's made of stainless steel tube and 24cm length -
Distributed by MVETweezer Mashers
Length: 21 cm Masher size: 25 x 25 mm -
En réapprovisionnement
It's made of Stainless Steel and total length is 135mm. -
Distributed by MVEOctogonal graphite reamer ø 24-11 mm
Handle lenght 23 cm Graphite lenght 100 mm, ø 24-11 mm -
Distributed by MVEOctogonal graphite reamer ø 38-2 mm
Handle lenght 23 cm Graphite lenght 50 mm, ø 38-2 mm -
Distributed by MVEOctogonal graphite reamer ø 19-2 mm
Handle lenght 23 cm Graphite lenght 100 mm, ⌀ 19-2 mm -
Distributed by MVESmall octogonal graphite reamer ø 16-2 mm
Handle lenght 22.5 cm Graphite lenght 40 mm, ø 16-2 mm -
En réapprovisionnement
MVEBlow Pipe
Small : 1/4 body, 3/8 head Medium : 5/16 body, 7/16 head Large : 3/8 body, 9/16 head -
En réapprovisionnement
Distributed by MVE
Double 90° brass swivel
The diameter of the swivel is 1/4 -
En réapprovisionnement
Distributed by MVE12-In-1 Graphite Marble Mold
The outside dimensions of the graphite block roughly are 2" thick x 4-1/8" x 4-1/8". -
MVEVin Pin
-
Distributed by MVESmall graphite straight shaper
Graphite length 7.5cm, width 2cm Total length 24.5 cm -
En réapprovisionnement
Distributed by MVE, The Blast ShieldLarge cone graphite reamer ø 26 mm
Handle lenght 18 cm Graphite lenght 65 mm, ø 26 mm -
Distributed by MVECurvedGraphite Paddle
Graphite length: 7.5cm Width: 5.5cm at the base, 2.5cm at the tip Total length: 25cm -
Distributed by MVE, The Blast ShieldStainless Steel Triangle Reamer
Handle lenght 12.5 cm Reamer isosceles triangle base 50 mm, height 75 mm -
Distributed by MVEGraphite paper tape
-
Distributed by MVELarge disc big hole beads’ graphite mould
-
En réapprovisionnement
Distributed by MVESkull graphite “push” mould
Approximate mould (skull) size: 14mm (W) x 20mm (H) x 8mm (D) External size 5.5 x 5.5 x 1.2cm height. -
En réapprovisionnement
Distributed by MVEGraphite Necking Tool
Size 8cm (h) x 7.5cm (w) x 5.5cm (stand's depth) -
Distributed by MVESmall brass holding claws
Total length: 25cm Handle lenght: 16 cm Opening: 3,1cm -
Distributed by MVE30° Graphite Cone Mold
Inner dimensions: 3" (76mm) diameter at the opening tapering to a point at the bottom at 2.6" (67mm) deep. Outside dimensions: 4" (10.1cm) diameter x 2.9" (7.5cm) height -
En réapprovisionnement
Distributed by MVEBrass reamer – square base 14-2 mm
Handle lenght 22.5 cm Brass reamer lenght 90 mm, square base 14-2 mm -
En réapprovisionnement
Distributed by MVE, The Blast ShieldGraphite triangular shaper – blast shield
Handle lenght 12.5 cm Graphite base 43 mm, height 65 mm, thickness 10 mm -
En réapprovisionnement
Distributed by MVE, The Blast ShieldSmall cone graphite reamer ø 24 mm
Handle lenght 18 cm Graphite lenght 30 mm, ø 24 mm -
Distributed by MVETriangular stainless shaper / Flaring tool
Handle lenght 19 cm Graphite isoceles triangle base 40 mm, height 34 mm -
Distributed by MVEFrit Sifters
Diameter 16cm Height 10cm -
En réapprovisionnement
Distributed by MVEGraphite Reamer – Pencil Style
Handle lenght 10 cm Graphite lenght 130 mm, ø 8 mm -
En réapprovisionnement
Distributed by MVEMarble Tweezer
-
En réapprovisionnement
Metal roller stand with adjustable rounded wheels that can be moved or removed. The wheels can be close together for small tubes or spread apart for larger tubes. -
En réapprovisionnement
Distributed by MVEMedium holding claws
Total length: 31cm Handle lenght: 14,5 cm Opening: 5,5cm Also available with Inside-out claws. -
En réapprovisionnement
Distributed by MVEMedium Inside-out claws
Total length: 31cm Handle lenght: 14,5 cm Opening: 6 - 7,3cm Also available with normal claws. -
Distributed by MVESmall leaf masher – 1 side
Tool measures approximately 12" in total Length. -
Distributed by MVERectangular parallel masher
Total lenght: 28 cm Paddle size: 20 x 35 mm -
En réapprovisionnement
Distributed by MVEEtching Cream
85 g soit +/-90mL -
Distributed by MVEOctogonal graphite reamer ⌀8-30mm
Handle lenght 28 cm Graphite lenght 150 mm, ⌀ 30-8 mm -
En réapprovisionnement
Distributed by MVEModular tungsten poker
Metal handle - 12 cm Poker - 17,5 cm ⌀ 1,5 mm -
En réapprovisionnement
Distributed by MVEIndividual tungsten poker
length - 17,5 cm -
Distributed by MVERod holder
Length 31 cm, ⌀ 10 mm Ideal for glass rods ⌀2 - 12mm -
Distributed by MVEWooden handle tungsten poker
Total length - 18 cm Poker - 7 cm ⌀ 2 mm -
Distributed by MVEGlass tubing scoring knife
The stick of the knife is in metal, and blades can be replaced. -
Distributed by MVEGround Glass Joint Shaping Mold
-
⌀ 21 mm -
blade size 7 x 7 x 4,6 mm (fitting the large tungsten scoring knife) -
Distributed by MVESmall brass holding claws
Total length: 25cm Handle lenght: 16 cm Claw and opening: 10,5 cm - 3,1cm -
Distributed by MVESilicon hose
⌀ inside : 6 mm ⌀ outside : 8 mm Wall : 1 mm
