Browse our shelves
-
MVEMandrel
Length: 25cm -
PerlenpresseSet 10 nuts for cabochon mandrel – THIN
Dimensions ⌀5,5mm x 2mm Threading M2,5 -
Distributed by MVEMouthpieces for Blow Hose
For glassblowers -
PerlenpresseSet 5 nuts for cabochon mandrel – THICK
Dimensions ⌀5,5mm x 5mm Threading M2,5 -
En réapprovisionnement
Distributed by MVEThin tip plier
The plier is 11 cm long. -
Distributed by MVEFine pointed and bent tip plier
The plier is 11,5 cm long. -
Distributed by MVECurved plier
The plier is 15 cm long. -
Distributed by MVETweezer plier with rounded end
-
PerlenpresseCabochon disk base
Thickness 2mm Threading - M2.5 - fits all systems with 2.5mm thread -
PerlenpresseSet 2 threaded rods M4 with threaded sleeves
-
Distributed by MVESpring plier
The plier is 11.5 cm long. -
En réapprovisionnement
Distributed by MVEEtching Cream
85 g soit +/-90mL -
Excellent tool for shaping and flaring tops and bases -
PerlenpresseCabochon mandrel 4mm
Threaded bit M2,5 x 4mm -
PerlenpresseCabochon mandrel 6mm
Threaded bit M2,5 x 6mm -
Distributed by MVEWooden tweezers
Length 230mm -
Distributed by MVESilicon hose
⌀ inside : 6 mm ⌀ outside : 8 mm Wall : 1 mm -
En réapprovisionnement
Distributed by MVEPencil with double diamond scraper
The pencil is 13cm long. -
Thick stainless steel stand, length 20cm -
En réapprovisionnement
Distributed by MVEGraphite Reamer – Pencil Style
Handle lenght 10 cm Graphite lenght 130 mm, ø 8 mm -
Distributed by MVETriangular stainless shaper / Flaring tool
Handle lenght 19 cm Graphite isoceles triangle base 40 mm, height 34 mm -
PerlenpresseStainless steel ring with interchangeable tops
Threading M 2,5 -
MVERing Mandrel
The diameter of the ring tube is 19mm, lenght of the ring tube is 3,5cm, the leght of the mandrel is 29.5 cm. -
Distributed by MVEIndividual tungsten poker
length - 17,5 cm -
Nose length 38mm -
En réapprovisionnement
They measure 17cm in lenght -
Distributed by MVE90° single brass swivel
90-degree brass swivel -
Distributed by MVEStraight single brass swivel
Diameter : 4.8mm Length : 40mm -
⌀ 21 mm -
Length 17cm Material Stainless steel -
Distributed by MVESmall angled masher 1 side groove – ECO
-
En réapprovisionnement
Distributed by MVESmall round masher – ECO
-
En réapprovisionnement
MVETube Mandrel
It's made of stainless steel tube and 24cm length -
Distributed by MVELeaf masher
Leaf's size +/- 40 x 25mm -
Distributed by MVEBlack Magic Carbon Wax
-
PerlenpresseRing mandrel – 3 sizes
Length 27cm sold by the unit -
Distributed by MVESmall leaf masher – 1 side
Tool measures approximately 12" in total Length. -
Distributed by MVESet of 3 beads tweezers
-
En réapprovisionnement
5x3 cm -
Handle lenght 92mm ∅ 6mm Brass reamer lenght 35mm, square base 10-1 mm -
Distributed by MVETweezer Mashers
Length: 21 cm Masher size: 25 x 25 mm -
Distributed by MVEBlowing kit w/ 90° single brass swivel
the kit includes :- 150 cm long silicone hose ID 6mm/OD 8mm x1
- 90° single brass swivel (⌀ 6,35 mm aka 1/4") x1
- plastic mouth piece x1
-
Distributed by MVEBlowing kit w/ straight single brass swivel
The kit includes :- 150cm long silicon hose ID 6mm/OD 8mm x1
- Straing single brass swivel (⌀ 4,8 mm x 40 mm) x1
- Mouth piece x1
-
En réapprovisionnement
Distributed by MVERod holder CORINA
Length 255 mm, ⌀ 6 mm Ideal for glass rods ⌀2 - 12mm -
En réapprovisionnement
Distributed by MVEGraphite plate
Size details in description below -
Distributed by MVEGraphite Paddles
-
En réapprovisionnement
Distributed by MVEModular tungsten poker
Metal handle - 12 cm Poker - 17,5 cm ⌀ 1,5 mm -
Distributed by MVENo-Scratch Titanium Pen
-
blade size 7 x 7 x 4,6 mm (fitting the large tungsten scoring knife) -
En réapprovisionnement
Distributed by MVE, The Blast ShieldSmall cone graphite reamer ø 24 mm
Handle lenght 18 cm Graphite lenght 30 mm, ø 24 mm -
Excellent tool for shaping and flaring tops and bases
-
En réapprovisionnement
It's made of Stainless Steel and total length is 135mm. -
Distributed by MVE, Fusion Products Int.FPI Bead release
-
Distributed by MVE
Double 90° brass swivel
The diameter of the swivel is 1/4 -
Distributed by MVEMarble Tweezer
-
En réapprovisionnement
Distributed by MVEMedium holding claws
Total length: 31cm Handle lenght: 14,5 cm Opening: 5,5cm Also available with Inside-out claws. -
En réapprovisionnement
Distributed by MVEBrass Necking Tool
Size 10cm (h) x 7.5cm (w) x 5.5cm (base depth) -
They measure 19cm in lenght -
Distributed by MVEMedium Inside-out claws
Total length: 31cm Handle lenght: 14,5 cm Opening: 6 - 7,3cm Also available with normal claws. -
Distributed by MVEWooden handle tungsten poker
Total length - 18 cm Poker - 7 cm ⌀ 2 mm -
En réapprovisionnement
Total length 25,50cm Paddle size 7 x 5 cm Material Metal -
PerlenpresseGraphite knob roller pattern n°9 – small
Knob dimensions +/- (h) 20mm x (w) 20mm -
PerlenpresseGraphite knob roller pattern n°7 – small
Knob dimensions +/- (h) 20mm x (w) 17mm -
En réapprovisionnement
PerlenpresseGraphite knob roller pattern n°2 – small
Knob dimensions +/- (h) 20mm x (w) 18mm -
Distributed by MVEGraphite Aérosol spray 10oz
-
Distributed by MVE, The Blast ShieldStainless Steel Triangle Reamer
Handle lenght 12.5 cm Reamer isosceles triangle base 50 mm, height 75 mm -
Distributed by MVERectangular parallel masher
Total lenght: 28 cm Paddle size: 20 x 35 mm -
MVECup Shears small
They measure 20cm in length, with a 3cm long blade that is 1.5mm thick. Made from stainless steel. -
Distributed by MVEDiamond scraper pensil and refill
-
Distributed by MVETungsten Scoring Knife
The knife is made out of metal, and the blades can be replaced. -
En réapprovisionnement
The total length is 215mm. -
Distributed by MVERod holder
Length 31 cm, ⌀ 10 mm Ideal for glass rods ⌀2 - 12mm -
En réapprovisionnement
MVEBlow Pipe
Small : 1/4 body, 3/8 head Medium : 5/16 body, 7/16 head Large : 3/8 body, 9/16 head -
Distributed by MVELeaf masher
Masher's lenght 30 cm Masher size 4 x 4,7 cm -
MVECup Shears
They measure 19cm in length, with a 3cm long blade that is 1.5mm thick. Made from stainless steel. -
Handle lenght 158 mm ∅ 8mm Brass reamer lenght 33 mm, square base 16-2 mm -
En réapprovisionnement
Distributed by MVEGraphite Necking Tool
Size 8cm (h) x 7.5cm (w) x 5.5cm (stand's depth) -
En réapprovisionnement
Distributed by MVETungsten curved plier
Curved plier in Tungsten. -
Distributed by MVETungsten tweezers – straight
Tungsten straight plier. -
En réapprovisionnement
Distributed by MVESmall graphite straight shaper
Graphite length 7.5cm, width 2cm Total length 24.5 cm -
En réapprovisionnement
Distributed by MVE, The Blast ShieldLarge cone graphite reamer ø 26 mm
Handle lenght 18 cm Graphite lenght 65 mm, ø 26 mm -
Distributed by MVECurvedGraphite Paddle
Graphite length: 7.5cm Width: 5.5cm at the base, 2.5cm at the tip Total length: 25cm -
En réapprovisionnement
Distributed by MVE, The Blast ShieldGraphite triangular shaper – blast shield
Handle lenght 12.5 cm Graphite base 43 mm, height 65 mm, thickness 10 mm -
Total length 25cm -
Distributed by MVEOctogonal graphite reamer ⌀8-30mm
Handle lenght 28 cm Graphite lenght 150 mm, ⌀ 30-8 mm
