-
Distributed by MVEGlassworking Safety Goggles 66 (Unisex)
The 66 model features fully adjustable, ratcheting and telescoping sidepieces for a perfect fit. The large lens design ensures maximum safety and visibility. -
Distributed by MVE, Profound GlassStar Opal – Black
Opal sold by the unit -
Distributed by MVE, Profound GlassStar Opale – Mint
Opal sold by the unit -
Distributed by MVE, Profound GlassStar Opale – White
Opale sold by the unit -
Distributed by MVEOxygen pressure regulator
EN 585/ISO 2503 -
Distributed by MVETransport trolley for 2 oxygen bottles
This trolley is designed to safely move around 2 oxygen bottles of 10m3. A small chain on the trolley will help you to secure the bottles. -
Distributed by MVEFemale quick connector OXY
Adaptator ISOCOUPLE for oxygen. -
Distributed by MVEFull and fast adaptator with non-return valve
-
Distributed by MVEComplete quick connector OXY
-
Distributed by MVEComplete quick connector GAS
Adaptator ISOCOUPLE for propane. -
Distributed by MVEComplete quick connector with flashback arrestor OXY
-
Distributed by MVEY-fitting
-
Distributed by MVEBox of 14 nozzle cleaners
-
Distributed by MVEDouble ear clamp
-
En réapprovisionnement
Distributed by MVEWorkbench saver
Its pilot light allows instant re-ignition of the torch without modifying the setting. Remember to clean your torches regularly, we recommend cleaning every quarter for optimum use of your equipment. Robust and economical, its position on a workbench prevents additional weight in the hand. -
Distributed by MVEOxygen hose
Each hose is stamped with its norms (EN559 / ISO 3281) and date of fabrication. There is no expiration date but hoses need to be replaced depending on their condition (cracks, splits, bubbles, etc.). It is your responsability to regularly check them. -
Distributed by MVE
Propane/gas hose
Each hose is stamped with its norms (EN559 / ISO 3281) and date of fabrication. There is no expiration date but hoses need to be replaced depending on their condition (cracks, splits, bubbles, etc.). It is your responsability to regularly check them. -
Distributed by MVE10L Oxygen-concentrator
10 Litres Oxygen concentrator -
Distributed by MVEComplete quick connector with flashback arrestor GAS
-
En réapprovisionnement
Distributed by MVEMicro torch
Micro torch including flexible hoses and 5 interchangeable tips -
Distributed by MVEBlower glass clip, mixed model
The clips adapt to all spectacle frames.Aviator style clip-on, flip-up glassworking eyewear with BoroTruView -
Distributed by MVEGlassworking Safety Goggles (Unisex)
The nylon frame is light, confortable and resistant, designed to fit on top of your regular glasses. -
Distributed by MVEGlassworking Safety Goggles (Unisex)
Anodised aluminium frame with a head-wrapping design. Certified ANSI Z87. Lenses are made of polycarbonate Sodium Flare with anti-scratch protective coat. -
Distributed by MVEGlassworking Safety Goggles (Unisex)
Simple and elegant frame. The shape of the goggles will protect you from light coming from any direction, and is designed to fit perfectly around the head while protecting you from any splashing. The rectangular frame, lighter and resistant, is made of nylon plastic TR-90 for a great resistance to shocks ad chemical products. 375 model is certified ANSI Z87+. -
Distributed by MVE5L Oxygen Concentrator
5 Litres Oxygen concentrator -
Distributed by MVEVermiculite
4 liter bag of vermiculite -
Distributed by MVETweezer plier with rounded end
-
Distributed by MVESpring plier
The plier is 11.5 cm long. -
En réapprovisionnement
Distributed by MVEThin tip plier
The plier is 11 cm long. -
En réapprovisionnement
Distributed by MVECurved plier
The plier is 15 cm long. -
Distributed by MVEFine pointed and bent tip plier
The plier is 11,5 cm long. -
Excellent tool for shaping and flaring tops and bases -
Distributed by MVEParallel masher
Paddle size 1-5/8" by 1-7/8 with metal Handles. Tool measures approximately 12" in total Length. -
Distributed by MVELeaf masher
Masher's lenght 30 cm Masher size 4 x 4,7 cm -
Distributed by MVEMedium locking claw
Handle length: 6.5” long -
Distributed by MVE14″ Inside-out locking claw
Handle length: 6.5” long -
En réapprovisionnement
Distributed by MVETungsten curved plier
Curved plier in Tungsten. -
Distributed by MVETungsten tweezers – straight
Tungsten straight plier. -
Distributed by MVEDiamond scraper pensil and refill
-
Distributed by MVEGraphite Paddles
-
En réapprovisionnement
Distributed by MVEGraphite plate
Size details in description below -
En réapprovisionnement
Distributed by MVEWooden tweezers
Length 230mm -
Distributed by MVE90° single brass swivel
90-degree brass swivel -
Distributed by MVETungsten Scoring Knife
The knife is made out of metal, and the blades can be replaced. -
En réapprovisionnement
Distributed by MVEPencil with double diamond scraper
The pencil is 13cm long. -
Distributed by MVEStraight single brass swivel
Diameter : 4.8mm Length : 40mm -
Distributed by MVEBlowing kit w/ 90° single brass swivel
the kit includes :- 150 cm long silicone hose ID 6mm/OD 8mm x1
- 90° single brass swivel (⌀ 6,35 mm aka 1/4") x1
- plastic mouth piece x1
-
Distributed by MVEBlowing kit w/ straight single brass swivel
The kit includes :- 150cm long silicon hose ID 6mm/OD 8mm x1
- Straing single brass swivel (⌀ 4,8 mm x 40 mm) x1
- Mouth piece x1
-
Distributed by MVEMouthpieces for Blow Hose
For glassblowers -
Distributed by MVEAdapter for 5kg propane cube
Compatible with ø 27mm valve gas bottles -
Distributed by MVEGas pressure regulator
Adjustable from 1 to 4 bar -
Distributed by MVEHose barb set for oxyconcentrator
-
En réapprovisionnement
Distributed by MVEHose barb set (oxy + gas)
Suitable for American torches. -
En réapprovisionnement
Distributed by MVEComplete set for American torch fitting
Suitable for American torches. -
Distributed by MVETweezer Jacks
3 models available. -
Distributed by MVEGraphite Aérosol spray 10oz
-
Distributed by MVEBlack Magic Carbon Wax
-
En réapprovisionnement
Distributed by MVECarlisle Bunsen 122 – Quatre barils
Entirely mode of stainless steel. Maintenance accessories are included. -
En réapprovisionnement
Distributed by MVEMarble mould
Graphite moulds for Marble -
Distributed by MVETweezer Mashers
Length: 21 cm Masher size: 25 x 25 mm -
Distributed by MVEOctogonal graphite reamer ø 24-11 mm
Handle lenght 23 cm Graphite lenght 100 mm, ø 24-11 mm -
Distributed by MVEOctogonal graphite reamer ø 38-2 mm
Handle lenght 23 cm Graphite lenght 50 mm, ø 38-2 mm -
Distributed by MVEOctogonal graphite reamer ø 19-2 mm
Handle lenght 23 cm Graphite lenght 100 mm, ⌀ 19-2 mm -
Distributed by MVESmall octogonal graphite reamer ø 16-2 mm
Handle lenght 22.5 cm Graphite lenght 40 mm, ø 16-2 mm -
Distributed by MVEBurner Prometheus T2+
-
En réapprovisionnement
Distributed by MVE
Double 90° brass swivel
The diameter of the swivel is 1/4 -
En réapprovisionnement
Distributed by MVE12-In-1 Graphite Marble Mold
The outside dimensions of the graphite block roughly are 2" thick x 4-1/8" x 4-1/8". -
Distributed by MVESmall graphite straight shaper
Graphite length 7.5cm, width 2cm Total length 24.5 cm -
En réapprovisionnement
Distributed by MVE, The Blast ShieldLarge cone graphite reamer ø 26 mm
Handle lenght 18 cm Graphite lenght 65 mm, ø 26 mm -
Distributed by MVECurvedGraphite Paddle
Graphite length: 7.5cm Width: 5.5cm at the base, 2.5cm at the tip Total length: 25cm -
Distributed by MVE, The Blast ShieldStainless Steel Triangle Reamer
Handle lenght 12.5 cm Reamer isosceles triangle base 50 mm, height 75 mm -
Distributed by MVEGraphite paper tape
-
Distributed by MVELarge disc big hole beads’ graphite mould
-
En réapprovisionnement
Distributed by MVESkull graphite “push” mould
Approximate mould (skull) size: 14mm (W) x 20mm (H) x 8mm (D) External size 5.5 x 5.5 x 1.2cm height. -
En réapprovisionnement
Distributed by MVEGraphite Necking Tool
Size 8cm (h) x 7.5cm (w) x 5.5cm (stand's depth) -
En réapprovisionnement
Distributed by MVESmall brass holding claws
Total length: 25cm Handle lenght: 16 cm Opening: 3,1cm -
En réapprovisionnement
Distributed by MVE30° Graphite Cone Mold
Inner dimensions: 3" (76mm) diameter at the opening tapering to a point at the bottom at 2.6" (67mm) deep. Outside dimensions: 4" (10.1cm) diameter x 2.9" (7.5cm) height -
En réapprovisionnement
Distributed by MVEBrass reamer – square base 14-2 mm
Handle lenght 22.5 cm Brass reamer lenght 90 mm, square base 14-2 mm -
En réapprovisionnement
Distributed by MVE, The Blast ShieldGraphite triangular shaper – blast shield
Handle lenght 12.5 cm Graphite base 43 mm, height 65 mm, thickness 10 mm -
En réapprovisionnement
Distributed by MVE, The Blast ShieldSmall cone graphite reamer ø 24 mm
Handle lenght 18 cm Graphite lenght 30 mm, ø 24 mm -
Distributed by MVETriangular stainless shaper / Flaring tool
Handle lenght 19 cm Graphite isoceles triangle base 40 mm, height 34 mm -
En réapprovisionnement
Distributed by MVEDichroic Glass rod
-
Distributed by MVEFrit Sifters
Diameter 16cm Height 10cm -
Distributed by MVEGraphite Reamer – Pencil Style
Handle lenght 10 cm Graphite lenght 130 mm, ø 8 mm -
Distributed by MVEMarble Tweezer
-
En réapprovisionnement
Distributed by MVEMedium holding claws
Total length: 31cm Handle lenght: 14,5 cm Opening: 5,5cm Also available with Inside-out claws. -
Distributed by MVEMedium Inside-out claws
Total length: 31cm Handle lenght: 14,5 cm Opening: 6 - 7,3cm Also available with normal claws. -
Distributed by MVEComplete gas safety connection kit
Compatible with Ø 27mm gas bottle valve -
Distributed by MVESmall leaf masher – 1 side
Tool measures approximately 12" in total Length. -
Distributed by MVERectangular parallel masher
Total lenght: 28 cm Paddle size: 20 x 35 mm