-
Distributed by MVE5L Oxygen Concentrator
5 Litres Oxygen concentrator -
Distributed by MVEComplete quick connector with flashback arrestor GAS
-
Distributed by MVEComplete quick connector with flashback arrestor OXY
-
Distributed by MVEFull and fast adaptator with non-return valve
-
Distributed by MVEFemale quick connector OXY
Adaptator ISOCOUPLE for oxygen. -
Distributed by MVETransport trolley for 2 oxygen bottles
This trolley is designed to safely move around 2 oxygen bottles of 10m3. A small chain on the trolley will help you to secure the bottles. -
Distributed by MVEOxygen pressure regulator
EN 585/ISO 2503 -
Distributed by MVE, Profound GlassStar Opale – White
Opale sold by the unit -
Distributed by MVE, Profound GlassStar Opal – Black
Opal sold by the unit -
Distributed by MVEBlower glass clip, mixed model
The clips adapt to all spectacle frames.Aviator style clip-on, flip-up glassworking eyewear with BoroTruView -
En réapprovisionnement
Distributed by MVEWorkbench saver
Its pilot light allows instant re-ignition of the torch without modifying the setting. Remember to clean your torches regularly, we recommend cleaning every quarter for optimum use of your equipment. Robust and economical, its position on a workbench prevents additional weight in the hand. -
Distributed by MVEBox of 14 nozzle cleaners
-
Distributed by MVEY-fitting
-
Distributed by MVESpring plier
The plier is 11.5 cm long. -
En réapprovisionnement
Distributed by MVECurved plier
The plier is 15 cm long. -
Distributed by MVEFine pointed and bent tip plier
The plier is 11,5 cm long. -
Distributed by MVE14″ Inside-out locking claw
Handle length: 6.5” long -
En réapprovisionnement
Distributed by MVETungsten curved plier
Curved plier in Tungsten. -
Distributed by MVEDiamond scraper pensil and refill
-
En réapprovisionnement
Distributed by MVEWooden tweezers
Length 230mm -
En réapprovisionnement
Distributed by MVEPencil with double diamond scraper
The pencil is 13cm long. -
Distributed by MVEStraight single brass swivel
Diameter : 4.8mm Length : 40mm -
Distributed by MVEBlowing kit w/ straight single brass swivel
The kit includes :- 150cm long silicon hose ID 6mm/OD 8mm x1
- Straing single brass swivel (⌀ 4,8 mm x 40 mm) x1
- Mouth piece x1
-
Distributed by MVEAdapter for 5kg propane cube
Compatible with ø 27mm valve gas bottles -
Distributed by MVEGas pressure regulator
Adjustable from 1 to 4 bar -
Distributed by MVEGraphite Aérosol spray 10oz
-
Distributed by MVEBlack Magic Carbon Wax
-
En réapprovisionnement
Distributed by MVECarlisle Bunsen 122 – Quatre barils
Entirely mode of stainless steel. Maintenance accessories are included. -
En réapprovisionnement
Distributed by MVEMarble mould
Graphite moulds for Marble -
Distributed by MVEOctogonal graphite reamer ø 19-2 mm
Handle lenght 23 cm Graphite lenght 100 mm, ⌀ 19-2 mm -
Distributed by MVESmall octogonal graphite reamer ø 16-2 mm
Handle lenght 22.5 cm Graphite lenght 40 mm, ø 16-2 mm -
Distributed by MVEBurner Prometheus T2+
-
En réapprovisionnement
Distributed by MVEDouble 90° brass swivel
The diameter of the swivel is 1/4 -
En réapprovisionnement
Distributed by MVE12-In-1 Graphite Marble Mold
The outside dimensions of the graphite block roughly are 2" thick x 4-1/8" x 4-1/8". -
Distributed by MVESmall graphite straight shaper
Graphite length 7.5cm, width 2cm Total length 24.5 cm -
Distributed by MVECurvedGraphite Paddle
Graphite length: 7.5cm Width: 5.5cm at the base, 2.5cm at the tip Total length: 25cm -
Distributed by MVE, The Blast ShieldStainless Steel Triangle Reamer
Handle lenght 12.5 cm Reamer isosceles triangle base 50 mm, height 75 mm -
Distributed by MVEGraphite paper tape
-
Distributed by MVELarge disc big hole beads’ graphite mould
-
En réapprovisionnement
Distributed by MVESkull graphite “push” mould
Approximate mould (skull) size: 14mm (W) x 20mm (H) x 8mm (D) External size 5.5 x 5.5 x 1.2cm height. -
En réapprovisionnement
Distributed by MVESmall brass holding claws
Total length: 25cm Handle lenght: 16 cm Opening: 3,1cm -
En réapprovisionnement
Distributed by MVE30° Graphite Cone Mold
Inner dimensions: 3" (76mm) diameter at the opening tapering to a point at the bottom at 2.6" (67mm) deep. Outside dimensions: 4" (10.1cm) diameter x 2.9" (7.5cm) height -
En réapprovisionnement
Distributed by MVEBrass reamer – square base 14-2 mm
Handle lenght 22.5 cm Brass reamer lenght 90 mm, square base 14-2 mm -
Distributed by MVEFrit Sifters
Diameter 16cm Height 10cm -
Distributed by MVEMarble Tweezer
-
Distributed by MVEComplete gas safety connection kit
Compatible with Ø 27mm gas bottle valve -
Distributed by MVESmall leaf masher – 1 side
Tool measures approximately 12" in total Length. -
Distributed by MVEEtching Cream
85 g soit +/-90mL -
Distributed by MVERod holder
Length 31 cm, ⌀ 10 mm Ideal for glass rods ⌀2 - 12mm -
En réapprovisionnement
Distributed by MVEGround Glass Joint Shaping Mold
-
Distributed by MVESmall brass holding claws
Total length: 25cm Handle lenght: 16 cm Claw and opening: 10,5 cm - 3,1cm -
En réapprovisionnement
Distributed by MVEKevlar protection sleeve with velcro band
Lenght : 56 cm -
En réapprovisionnement
Distributed by MVEKevlar protection sleeve
Lenght : 45 cm -
Distributed by MVESilicon hose
⌀ inside : 6 mm ⌀ outside : 8 mm Wall : 1 mm -
Distributed by MVE, Profound GlassDiamond
Diamond sold by the unit ⌀ 3mm -
Distributed by MVE, Madhatter GlassworksNeedle Valve for Flexburner or Microburner
Brass needle valve with adapter tubes for 1/4” hose. -
Distributed by MVE, Madhatter GlassworksDouble 90° swivel BloHoz
The diameter of the swivel is 1/4 -
En réapprovisionnement
Distributed by MVE, Madhatter GlassworksFlexburner Gen 2.0 PLUS
Magnetic base, supplied with fixable square metal bracket -
Distributed by MVE, Madhatter GlassworksFlexmount for Flexburner
-
Distributed by MVE, Madhatter GlassworksModular Y splitter
Y-splitter sold with 3 hose barb outlets ⌀ 45mm x h 19mm -
Distributed by MVE, PerlenpresseSet 2 screws for knobs – 24mm
Threading M4 Length 24mm - fitting 10 to 18mm door thickness -
Distributed by MVELeaf masher
Leaf's size +/- 40 x 25mm -
Distributed by MVESmall angled masher 1 side groove – ECO
-
En réapprovisionnement
Distributed by MVESmall round masher – ECO
-
En réapprovisionnement
Distributed by MVERod holder CORINA
Length 255 mm, ⌀ 6 mm Ideal for glass rods ⌀2 - 12mm -
En réapprovisionnement
Distributed by MVESet of 3 beads tweezers
-
En réapprovisionnement
Distributed by MVEBrass Necking Tool
Size 10cm (h) x 7.5cm (w) x 5.5cm (base depth) -
En réapprovisionnement
Distributed by MVENo-Scratch Titanium Pen
-
Distributed by MVEVin Pin – Rectangle
-
Distributed by MVEGlassworking Safety Glasses BoroTruView 3.0
Model 33 Colour Black -
En réapprovisionnement
Distributed by MVEGlassworking Safety Goggles (Woman)
Colour: black and red These goggles are perfect to work with borosilicate or soda-lime glass. -
Distributed by MVEMarble Tweezer ø14mm
Length 17cm Diametre The grip rings have 20mm outer diameter and 14mm inner diameter Material Stainless steel -
Distributed by MVEGlassworking Safety Goggles (Unisex)
The nylon frame is light, confortable and resistant, designed to fit on top of your regular glasses. -
Distributed by MVEPropane/gas hose
Each hose is stamped with its norms (EN559 / ISO 3281) and date of fabrication. There is no expiration date but hoses need to be replaced depending on their condition (cracks, splits, bubbles, etc.). It is your responsability to regularly check them. -
Distributed by MVE
Oxygen hose
Each hose is stamped with its norms (EN559 / ISO 3281) and date of fabrication. There is no expiration date but hoses need to be replaced depending on their condition (cracks, splits, bubbles, etc.). It is your responsability to regularly check them. -
Distributed by MVEComplete quick connector GAS
Adaptator ISOCOUPLE for propane. -
Distributed by MVEComplete quick connector OXY
-
Distributed by MVEVermiculite
4 liter bag of vermiculite -
Distributed by MVE, Profound GlassStar Opale – Mint
Opal sold by the unit -
Distributed by MVEParallel masher
Paddle size 1-5/8" by 1-7/8 with metal Handles. Tool measures approximately 12" in total Length. -
Distributed by MVEMedium locking claw
Handle length: 6.5” long -
Distributed by MVE
90° single brass swivel
90-degree brass swivel -
Distributed by MVEHose barb set for oxyconcentrator
-
En réapprovisionnement
Distributed by MVEComplete set for American torch fitting
Suitable for American torches. -
En réapprovisionnement
Distributed by MVE, The Blast ShieldGraphite triangular shaper – blast shield
Handle lenght 12.5 cm Graphite base 43 mm, height 65 mm, thickness 10 mm -
En réapprovisionnement
Distributed by MVE, The Blast ShieldSmall cone graphite reamer ø 24 mm
Handle lenght 18 cm Graphite lenght 30 mm, ø 24 mm -
Distributed by MVETriangular stainless shaper / Flaring tool
Handle lenght 19 cm Graphite isoceles triangle base 40 mm, height 34 mm -
Distributed by MVEOctogonal graphite reamer ⌀8-30mm
Handle lenght 28 cm Graphite lenght 150 mm, ⌀ 30-8 mm -
Distributed by MVEGlass tubing scoring knife
The stick of the knife is in metal, and blades can be replaced. -
Distributed by MVEElectric lighter