-
Distributed by MVE
10L Oxygen-concentrator
10 Litres Oxygen concentrator -
Distributed by MVE
5L Oxygen Concentrator
5 Litres Oxygen concentrator -
Distributed by MVE
Transport trolley for 2 oxygen bottles
This trolley is designed to safely move around 2 oxygen bottles of 10m3. A small chain on the trolley will help you to secure the bottles. -
Distributed by MVE
Burner Prometheus T2+
-
Distributed by MVE
Propane/gas hose
Each hose is stamped with its norms (EN559 / ISO 3281) and date of fabrication. There is no expiration date but hoses need to be replaced depending on their condition (cracks, splits, bubbles, etc.). It is your responsability to regularly check them. -
En réapprovisionnementDistributed by MVE
Workbench saver
Its pilot light allows instant re-ignition of the torch without modifying the setting. Remember to clean your torches regularly, we recommend cleaning every quarter for optimum use of your equipment. Robust and economical, its position on a workbench prevents additional weight in the hand. -
En réapprovisionnementDistributed by MVE, Madhatter Glassworks
Flexburner Gen 2.0 PLUS
Magnetic base, supplied with fixable square metal bracket -
Distributed by MVE
Glassworking Safety Glasses BoroTruView 3.0
Model 66 Colour Black -
Distributed by MVE
Glassworking Safety Glasses BoroTruView 3.0
Model 33 Colour Black -
En réapprovisionnementDistributed by MVE
Carlisle Bunsen 122 – Quatre barils
Entirely mode of stainless steel. Maintenance accessories are included. -
Distributed by MVE
Oxygen hose
Each hose is stamped with its norms (EN559 / ISO 3281) and date of fabrication. There is no expiration date but hoses need to be replaced depending on their condition (cracks, splits, bubbles, etc.). It is your responsability to regularly check them. -
Distributed by MVE
Oxygen pressure regulator
EN 585/ISO 2503 -
Distributed by MVE
Complete gas safety connection kit
Compatible with Ø 27mm gas bottle valve -
Distributed by MVE
Glassworking Safety Goggles (Unisex)
Anodised aluminium frame with a head-wrapping design. Certified ANSI Z87. Lenses are made of polycarbonate Sodium Flare with anti-scratch protective coat. -
En réapprovisionnementDistributed by MVE
Glassworking Safety Goggles (Woman)
Colour: black and red These goggles are perfect to work with borosilicate or soda-lime glass. -
En réapprovisionnementDistributed by MVE
12-In-1 Graphite Marble Mold
The outside dimensions of the graphite block roughly are 2" thick x 4-1/8" x 4-1/8". -
En réapprovisionnementDistributed by MVE
Marble mould
Graphite moulds for Marble -
Distributed by MVE
Glass tubing scoring knife
The stick of the knife is in metal, and blades can be replaced. -
Distributed by MVE
Valve with hose barb – propane or oxygen
Connector with 2 output set with a valve each -
Distributed by MVE
Glassworking Safety Goggles (Unisex)
The nylon frame is light, confortable and resistant, designed to fit on top of your regular glasses. -
Distributed by MVE
Glassworking Safety Goggles (Unisex)
Simple and elegant frame. The shape of the goggles will protect you from light coming from any direction, and is designed to fit perfectly around the head while protecting you from any splashing. The rectangular frame, lighter and resistant, is made of nylon plastic TR-90 for a great resistance to shocks ad chemical products. 375 model is certified ANSI Z87+. -
Distributed by MVE
Glassworking Safety Goggles 66 (Unisex)
The 66 model features fully adjustable, ratcheting and telescoping sidepieces for a perfect fit. The large lens design ensures maximum safety and visibility. -
Distributed by MVE
Vin Pin – Rectangle
-
Distributed by MVE
Blower glass clip, mixed model
The clips adapt to all spectacle frames.Aviator style clip-on, flip-up glassworking eyewear with BoroTruView -
Distributed by MVE
Complete quick connector with flashback arrestor OXY
-
Distributed by MVE
Large disc big hole beads’ graphite mould
-
Distributed by MVE
Silicon hose
⌀ inside : 6 mm ⌀ outside : 8 mm Wall : 1 mm -
Distributed by MVE
Tweezer Jacks
3 models available. -
Distributed by MVE
Complete quick connector with flashback arrestor GAS
-
En réapprovisionnementDistributed by MVE
Micro torch
Micro torch including flexible hoses and 5 interchangeable tips -
Distributed by MVE
14″ Inside-out locking claw
Handle length: 6.5” long -
Distributed by MVE
Medium locking claw
Handle length: 6.5” long -
En réapprovisionnementDistributed by MVE
30° Graphite Cone Mold
Inner dimensions: 3" (76mm) diameter at the opening tapering to a point at the bottom at 2.6" (67mm) deep. Outside dimensions: 4" (10.1cm) diameter x 2.9" (7.5cm) height -
En réapprovisionnementDistributed by MVE
Brass reamer – square base 14-2 mm
Handle lenght 22.5 cm Brass reamer lenght 90 mm, square base 14-2 mm -
Distributed by MVE
Frit Sifters
Diameter 16cm Height 10cm -
Distributed by MVE
Small brass holding claws
Total length: 25cm Handle lenght: 16 cm Claw and opening: 10,5 cm - 3,1cm -
Distributed by MVE
Graphite paper tape
-
En réapprovisionnementDistributed by MVE
Small brass holding claws
Total length: 25cm Handle lenght: 16 cm Opening: 3,1cm -
Distributed by MVE, Madhatter Glassworks
Double 90° swivel BloHoz
The diameter of the swivel is 1/4 -
Distributed by MVE
Octogonal graphite reamer ø 19-2 mm
Handle lenght 23 cm Graphite lenght 100 mm, ⌀ 19-2 mm -
Distributed by MVE
Octogonal graphite reamer ø 38-2 mm
Handle lenght 23 cm Graphite lenght 50 mm, ø 38-2 mm -
Distributed by MVE
Small octogonal graphite reamer ø 16-2 mm
Handle lenght 22.5 cm Graphite lenght 40 mm, ø 16-2 mm -
Distributed by MVE, Madhatter Glassworks
Flexmount for Flexburner
-
Distributed by MVE
Octogonal graphite reamer ø 24-11 mm
Handle lenght 23 cm Graphite lenght 100 mm, ø 24-11 mm -
En réapprovisionnementDistributed by MVE
Ground Glass Joint Shaping Mold
-
Distributed by MVE
Full and fast adaptator with non-return valve
-
Distributed by MVE
Parallel masher
Paddle size 1-5/8" by 1-7/8 with metal Handles. Tool measures approximately 12" in total Length. -
En réapprovisionnementDistributed by MVE
Skull graphite “push” mould
Approximate mould (skull) size: 14mm (W) x 20mm (H) x 8mm (D) External size 5.5 x 5.5 x 1.2cm height. -
Distributed by MVE
Complete quick connector OXY
-
Distributed by MVE
Complete quick connector GAS
Adaptator ISOCOUPLE for propane. -
Distributed by MVE
Gas pressure regulator
Adjustable from 1 to 4 bar -
Distributed by MVE
Octogonal graphite reamer ⌀8-30mm
Handle lenght 28 cm Graphite lenght 150 mm, ⌀ 30-8 mm -
Distributed by MVE, Madhatter Glassworks
Modular Y splitter
Y-splitter sold with 3 hose barb outlets ⌀ 45mm x h 19mm -
Distributed by MVE
Tungsten Scoring Knife
The knife is made out of metal, and the blades can be replaced. -
En réapprovisionnementDistributed by MVE, The Blast Shield
Graphite triangular shaper – blast shield
Handle lenght 12.5 cm Graphite base 43 mm, height 65 mm, thickness 10 mm -
Distributed by MVE
CurvedGraphite Paddle
Graphite length: 7.5cm Width: 5.5cm at the base, 2.5cm at the tip Total length: 25cm -
En réapprovisionnementDistributed by MVE, The Blast Shield
Large cone graphite reamer ø 26 mm
Handle lenght 18 cm Graphite lenght 65 mm, ø 26 mm -
Distributed by MVE
Small graphite straight shaper
Graphite length 7.5cm, width 2cm Total length 24.5 cm -
Distributed by MVE
Tungsten tweezers – straight
Tungsten straight plier.